Setting up a simple DNS server

Right after I’ve configured the FTP server, I wanted to be able to “name” my server and so I’ve installed a lightweight DNS server. (context: previous article)

dnsmasq is a lightweight DNS, TFTP, PXE, router advertisement and DHCP server. It is intended to provide coupled DNS and DHCP service to a LAN.”

I’ve chosen this over the bind 9 dns server because it was very easy to setup, I almost got it right the first time.

To install and configure dnsmasq, you’d usually do the following:

# On Ubuntu
sudo apt-get install dnsmasq
sudo cp /etc/dnsmasq.conf /etc/dnsmasq.conf.orig

And override /etc/dnsmasq.conf with this configuration:


# The address is the static IP of this server
# You can find this ip by running ifconfig and look for the
# IP of the interface which is connected to the router.
# Use open source DNS servers
# Create custom 'domains'.
# Custom 'domains' can also be added in /etc/hosts

And that’s basically it.

You can check the status of dnsmasq server by running: sudo systemctl status dnsmasq.

To actually use the server and make your computer recognize your custom domains you need to tell your computers to use the IP of the server on which dnsmasq is installed, in my case it is

Thank you for reading!

Twitter | DORefferal

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.